Backyard Grill 720-0783B Manual De Instrucciones página 16

(e) Push control knob (U) onto valve control stem.
See Fig.20.
(f) Plug ignition wire into igniter electrode hanging
from the underside of burner. See Fig.21.
7. Igniter and Battery Assembly
(a) Remove igniter cover and lock washer from
igniter. Insert igniter through from back of side
burner control panel, secure lock washer from
front of side burner control panel. See Fig.22.
(b) Install battery (V) into ignition box with positive
terminal facing outward.
(c) Replace the ignition battery cap after the
battery has been installed. See Fig.22.
Note: Make sure the igniter is assembled
with the wires upward 45°, so that the
wires are away from manifold.
See illustration below:
PDF 文件使用 "pdfFactory Pro" 试用版本创建
igniter
manifold
Fig.20
U
Fig.21
Fig.22
Lock Washer
v
16
www.fineprint.cn