Bose Professional DesignMax DM5SE Guia De Instalacion página 5

PRO.BOSE.COM
Wiring the Loudspeaker
Wire Gauge
The DesignMax DM5SE loudspeaker is designed to work with 18 AWG (0.8 mm
Connection Diagrams
Expose six millimeters (1/4 inch) of bare wire to attach to the terminals.
Note: The loudspeaker is not
rated for use with a rigid conduit.
The loudspeaker is suitable
for a flexible conduit or wiring
connection only.
Loudspeaker Settings
Using a Safety Cable
Some regional construction codes require the use of a secondary
method of securing loudspeakers to support structures
to provide additional safety. Choose a mounting position,
method, and hardware consistent with local building codes and
regulations.
A safety cable can be attached to the loudspeaker using the
threaded insert on the back of the enclosure.
The insert is sized for an M6 screw (not included) with a depth of
15 millimeters (0.59 inches).
Installation Guide • DesignMax DM5SE
) to 14 AWG (2.1 mm
2
70V/100V
3W 6W
6W 12W
* Factory default
Transformer Tap Setting
Set tap by turning. Use a flat head screwdriver.
) size wire only.
2
8Ω
70V
12W 25W
25W 50W
100V
** NC: No Connection (do not use)
Setup
50W*
8Ω
NC**
English • 5