Publicidad
Idiomas disponibles
Idiomas disponibles
9. SERVICING AND REPAIR
Defective items of equipment are to be serviced and repaired exclusively by persons
authorized by the manufacturer. All repair work shall employ original manufacturer's
parts only.
9.1 FUSE REPLACEMENT
CAUTION Always disconnect power cord and turn main switch off before fuse
replacement.
Turn light source off and unplug power cord. On back of unit remove fuse by turning
fuse cover and pulling out fuse. Replace fuse with
rated fuse. Insert back into fuse housing.
Re-connect the power cord and turn the LED light source on according to section
6.1.
9.2 LIMITED WARRANTY
Your LED light source carries a 1-year warranty from the date of shipment on
workmanship and all defects of material. Should your product prove to have such
defects within one year of the shipment. MTI will repair or replace the product or
component part without charge. Should your LED Light Source product(s) need
servicing
under
documentation. You should carefully pack unit in a sturdy carton and ship it to the
factory. Please include a note describing the defects, your name, telephone number
and a return address.
accidental damage, normal wear and tear or if transferred to a new owner without
authorization from, MTI. This warranty gives you specific legal rights and you may
also have other rights that vary from state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping
prepaid to the factory. Your product will be inspected and an estimate of repair charges
will be submitted to you for approval. Payment must be received before repairs are
completed.
• FAX number:
• Customer Service
LIT158 MTI
(English)
this
warranty,
please
Warranty does not cover equipment subject to misuse,
2 AMP (1/4" x 1 ¼") time delay 250V
contact,
MTI
return
801-952-0548
801-887-5114
authorization
Rev. B
Page 11 of 60
Publicidad
