MTI MT50-LED Manual Del Operador página 4

2. WARNINGS
To prevent fire or electric shock, do not open or expose the LED light source unit to
rain or moisture. Refer all servicing to qualified personnel only.
Not suitable for use in presence of flammable anesthetic mixture with air or with
oxygen or nitrate oxide.
To prevent any potential electro-magnetic interference, do not use any kind of
cellular phone near the light source.
This product should be used only with type BF endoscopic instruments which have
been certified according to IEC 601-1 for medical equipment and IEC 601-2-18 for
endoscopic equipment.
This symbol indicates type BF equipment.
Caution
This product is not provided as sterile.
Caution
All devices connecting to the LED Light Source must be classified as medical
equipment. When additional information processing equipment is connected to the
LED Light Source, the operator must determine that all equipment complies with the
appropriate end-product standards (such as IEC 60950 or IEC 60065 and the
Standard for Medical System, IEC 60601-1-1).
Caution
The LED Light source can cause permanent eye damage if viewed directly with
unprotected eye. To reduce the chance of eye damage, set the intensity control
always to the minimum level and plug the fiber optic cable into the unit before
turning on the power.
EQUIPMENT CONNECTION
Caution
The fiber optic cable must be a NON-CONDUCTIVE CABLE. It should not have
conductive shielding or any other conductive connection between the patient and
equipment. Such connection will impair safety of the equipment. It must be rinsed
free of soaking/disinfectant solution and dried before plugging into the LED light
source receptacle. Ensure the optical surface is clean before engaging into the light
source.
LIT158 MTI
(English)
Rev. B
Page 4 of 60