Tecno-gaz 2033CLS Instrucciones De Uso página 81

ENGLISH
To execute a wider arc, it is necessary to disengage the levers by keeping them together as
in Fig. 2 and bring them to the start of stroke 1 or 2 (If you want to rotate the lever to
decrease the closing pressure, start of stroke 2. If you want to rotate the lever to increase
the closing pressure, start of travel 1) After having brought the levers to the start of travel,
release them as in Fig. 1 and rotate again in the desired direction.
Fig. 1 – Lever inserted
Fig. 2 – Lever disengaged
Substitution printer paper
Thermographic paper roll 57 mm wide (spare code DNVA363). Thermographic paper can
be printed on one side only. Open the printer cover by pushing the button place the paper
roll by paying attention to the rotation direction, pull the paper until it comes out and close
the cover; the printer is ready for printing.
A3