FRIGOGLASS Plus-900 C Manual De Instrucciones página 17


Check the electrical connections.

Check that the electrical box cover of the thermostat or the electronic controller is properly
installed.

Check that components that might have been replaced during servicing are original.
3. Refrigeration system:

Check that the compressor is functioning properly.

Check the starting relay, the overload and the capacitor. The Supplier recommends that the
compressor's starting relays and overloads be replaced every 3-4 years.

Check the fan motor condenser and fan motor evaporator.

Check that the thermostat or the electronic controller and its components are functioning properly.

Check the cooling performance of the ICM.

Check the cooling circuit using the appropriate leak detector in case there is any concern or sign
of refrigerant leak.
1. Avoid damages resulting from improper installation & operation, improper maintenance & cleaning,
as well as improper handling and transportation, as per paragraphs 4, 6 and the Appendix A
above.
2. Do not perform unauthorised adaptations, modifications or adjustments to the cabinet.
Do not damage the refrigerant circuit.
GUIDELINES TO PREVENT CORROSION OF THE CABINET
APPENDIX C
ENG
10