Napa Carlyle TW38RH2 Manual De Instrucciones página 2

WARNING - FOLLOW THESE RULES FOR SAFE OPERATION!
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY
This insTrucTion Manual conTains iMporTanT
safeTy inforMaTion. read This insTrucTion
Manual carefully and undersTand all
inforMaTion Before operaTing This Tool.
• To safeguard torque accuracy avoid keeping
tool set at high loads for long periods of time.
When finished reset back to zero.
• Do not operate without eye and hand
protection (users and bystander).
• Keep body working stance balanced and firm.
Do not overreach when operating the tool.
• Keep fingers and hands away from pinch
point region of this tool at all times.
• Do not force tool beyond its rated capacity.
Overtorqueing can cause breakage.
• Use of a "cheater bar" or leverage multipliers
will result in an inaccurate reading and can
possibly damage the wrench. Use of
unapproved accessories could push the unit
beyond its rated capacity and will void your
warranty.
WARRANTY
MANUAL CLICK TORQUE WRENCH - LIMITED 1 YEAR WARRANTY
Carlyle Professional Hand Tools warrants to the original purchaser that the company's manual click torque wrenches are
free from defects in material or workmanship during the 1 year warranty period. We will repair or replace any manual torque
wrench which fails to give satisfactory service due to defective workmanship or materials (excluding calibration) for 1 year from
the date of original purchase. (Calibration is only covered by this warranty for each new unused torque wrench out of the
box.) Repairs or replacements are warranted as described above for the duration of the original warranty period. Products must
be returned with proof of purchase, freight prepaid, to the warranty service center listed below.
This warranty excludes torque wrenches which have been subjected to abnormal use, accident, neglect, or lack of
maintenance. Any modification, disassembly of this wrench or repair by an unauthorized service center will void the
warranty.
This warranty gives you specific rights. You may also have other rights which vary from state to state.
The foregoing obligation is Carlyle Professional Hand Tools sole liability under this or any implied warranty and under no
circumstances shall Carlyle Professional Hand Tools be liable for any incidental or consequential damages.
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation
or exclusion may not apply to you.
For Warranty Service and Recalibration/Certification Services, contact:
IMPORTANT SHIPPING NOTE: To avoid shipping damage when you return your torque wrench for repair, please enclose your
Carlyle Torque Wrench in its original molded case (if included with your model) and package securely so that it is resistant to
impact shock while in transit.
TW38RH2, TW12RH1, TW34
Torque Wrench Repair Facility
315 Hawkins Rd.
Travelers Rest, SC 29690
Phone: 866.496.8423 • Fax: 864.834.6651
2
• Do not use torque wrench to loosen fasteners.
• The wrench should be sent in for calibration once
every year or every 5,000 cycles for re-calibration.
• The wrench should be cleaned and stored
properly after every use. Do not submerge this unit
in any fluid.
• Wrenches should be re-calibrated if dropped or
accidentally mishandled.
• The torque wrench should be "exercised" a
minimum of three times at 100% of full scale
before use.
• Do not remove any labels. Replace damaged
labels.
• This product contains chemicals known to the
State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
thoroughly after handling.
• Failure to heed these warnings may result in
serious or fatal personal injury and/or property
damage.
Rev. 02/27/15