Napa Carlyle TW38RH2 Manual De Instrucciones página 5

REPLACING THE HEAD KIT (CONT.)
Step 5: Place the direction plate onto the ratchet head
making sure the pin on the bottom of the direction plate
hooks into the cusp at the bottom of the heart spring.
See arrows in Fig. 6.
Step 6: Fasten the direction plate to the ratchet head with
the direction plate screw. Fig. 7.
Step 7: Tighten the direction plate screw all of the way
down.
Test functionality: A. Turn the driver B. Switch can shift in both
directions. Fig. 8.
TW38RH2, TW12RH1, TW34
Fig.7
Fig.8
5
Fig. 6
Rev. 02/27/15