LG WFS1818EKD Manual Del Usuario página 14

14
F
unction of each Button
WATER TEMPERATURE BUTTON
• Use to select Water Temperature.
Pressing the button allows you to select
COLD WARM (HOT&COLD)
HOT COLD respectively.
AIR DRY
• This function is used to reduce the drying time
of the laundry by allowing air to circulate
within the bowl in order to reduce moisture
levels.It does not dry the clothes completely.
• Air dry selections light up in sequence as
follows.
60 90 120
• Press the button for 3 seconds to select and
press the Power botton to cancel the operation.
(refer to page 22)
SOIL LEVEL BUTTON
• This button allows you to
select the strength of the
wash action.
• Power option selections
light up in sequence as
follows Normal
Light Normal as the
button is pushed.
This can be selected for any
program.
• Adjustment can be made
while washing.
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
60 as the button is pushed.
TUB DRY
• Use this when you
want to dry the
empty tub after a
wash.
• This can be
Heavy
set/canceled by
pressing the Wash
button and Rinse
button
simultaneously.
(refer to page 22)
WATER LEVEL BUTTON
• Use to select the proper amount of water in relation to the weight and
type of laundry.
• Automatically controlled,but can be selected manually by pressing the
WATER LEVEL Botton.
• WATER LEVEL is automatically selected for FUZZY(normal) program.
The following settings are indicated as the button is pushed
7 8 9 10 1 2 3
WASH. RINSE. SPIN BUTTON
• Use when wash, rinse, spin
time need to be adjusted.
• The time increases when the
button is pressed .
• If adjustments are needed
during the wash,press the
[start/pause ] button before
making any changes.
• When the button is pressed
during washing,the
remaining time is displayed.
4 5 6 7
CHILD LOCK FUNCTION
• Use to lock or unlock the
control buttons to prevent
settings from being
changed by a child.
To lock,push the RINSE
and SPIN buttons
simultaneously and to
unlock push them one
more time during the
washing process.
(refer to page 25)