Diamond MIV-40 Manual De Instrucciones página 25

ASSEMBLY / DISASSEMBLY
The assembly / disassembly operations of every device of the machine are performed with the machine stop
and with the plug disconnected from the socket, or with the sectioning device in OFF.
The machine assembly goes on in different phases (for example it is showed the machine with base body).
TOOLS ASSEMBLY
MODEL 250VF-VV
1. Align and insert the coupling (5)
of the mixer (3) in the clutch (2)
of the machine body (1)
2. Screw the mixer (3) up to fasten
it firmly to the machine body (1)
TOOLS ASSEMBLY
MODEL 300/400 VV
1. Align and insert the tools
coupling (5) in the quick clutch
(2) of the motor body (1)
2. Turn the tools (3-4) up to fasten
them firmly to the machine body
(l)
TOOLS ASSEMBLY
MODEL 350/450/650 VF-VV
1. Align and insert the coupling (5)
of the tools (3-4) in the clutch
(2) of the machine body (1)
2. Screw the nut (6) up to fasten
them firmly to the machine body
(1).
The disassembly activities perform following in a backwards way the assembly phases previously described.
It is forbidden the use of the whisk tool in the fixed speed machines (VF)
It is forbidden the whisk tool use in the machines with variable speed (VV)
with the max speed function
WHISKS
ASSEMBLY/DISASSEMBLY
For the disassembly pull the whisks
(1) as soon as they don't part from a
reducer group (2).
To assemble them insert the whisks
basis (1) in the reducer group pivot
(2) and push thoroughly.
250 VF-VV
300 / 400 VV
350 / 450 / 650 VF-VV
Pag. di
9 13