Customer Responsibilities; Scheduled Maintenance; Maintenance; Storage - Agri-Fab 45-0522 Manual Del Usuario

CUSTOMER RESPONSIBILITIES

Read and follow the maintenance schedule and the
procedures listed in the maintenance section.
MAINTENANCE SCHEDULE
Fill in dates as you
complete regular service.
Check for loose fasteners
Check for worn or damaged parts
Lubricate wheel bearings
Clean Sweeper
Clean/Lubricate gears

SCHEDULED MAINTENANCE

1. Clean the sweeper after each use. Check the height
adjustment slot for packed debris
2. Inspect for worn or damaged parts, such as brushes
and wheels. See figure 19.
FLAT WASHER
FIGURE 19
3. Every two years, remove the wheels and clean the
gears found inside the wheel housing. After cleaning,
lubricate with an even coat of light grease. To remove
the wheel, pop off the hub cap using a screwdriver
and remove the lock nut, flat washer and spacer from
the end of the bolt inside the sweeper. See figure 20.
CAUTION: Before storing the sweeper,
always empty the hopper bag to avoid
spontaneous combustion.

MAINTENANCE

X
X
X
HEIGHT ADJUSTMENT SLOT
HEX BOLT
X
X
X
X
HEX LOCK NUT
SPACER
FIGURE 20
CLEANING
1. Clean sweeper housing with a soft brush or cloth.
2. Clean debris from hopper bag with a brush or broom.
3. Remove any material which has wrapped around
brushes or ends of brush shaft.

STORAGE

1. Clean the sweeper and hopper bag thoroughly to help
prevent rust and mildew.
2. To collapse the hopper bag for storage, remove the
two hopper support rods from the rear of the hopper.
3. Store in a dry area.
14
Service Dates
FLAT WASHER
FLAT WASHER
HUB CAP
HEX BOLT