SNOWJOE sunjoe SPX2680-MAX Manual Del Operador página 7

3. Slide the cord holder into position (Fig. 3).
Fig. 3
4. Install both wheels into either side of the pressure washer
(Fig. 4).
Fig. 4
5. To connect the spray wand to the trigger gun, insert the
locking lugs on the spray wand into the end of the trigger
gun. Twist clockwise to lock them together (Fig. 5).
Fig. 5
Locking lugs
Spray wand
6. Connect the high-pressure hose to the trigger gun. Twist
to secure the connection (Fig. 6).
Fig. 6
Trigger gun
Cord holder
7. Connect the other end of high-pressure hose to the water
outlet on the pressure washer and tighten securely (Fig. 7).
Fig. 7
m
WARNING!
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
8. Connect the garden hose adapter (female coupler) to
the water inlet of the pressure washer, then thread your
garden hose (male end) into the garden hose adapter
(Fig. 8). The garden hose must have an internal diameter
of at least 12 mm (1/2 in.) and must be reinforced. The
water supply flow rate must be at least equal to the
pressure washer's delivery capacity.
Trigger
NOTE: The machine is not suitable for connection to a
gun
potable water main.
7
High-pressure
hose
Water outlet
Keep hose away from sharp objects.
High-pressure
hose