Brizo ARTESSO 63225LF Serie Manual De Instrucciones
Ocultar thumbs
Ver también para ARTESSO 63225LF Serie:
- Guia de inicio rapido (12 páginas) ,
- Guia de inicio rapido (2 páginas) ,
- Manual de instrucciones (8 páginas)
Publicidad
Enlaces rápidos
Models/Modelos/Modèles
63125LFs & 63225LFs
Series/Series/Seria
ARTESSO™
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
sSpecify Finish / Especifíque el Acabado / Précisez le Fini
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
For easy installation of your
Brizo
faucet you will need:
®
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
Pour installer votre robinet
Brizo
facilement, vous devez:
®
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
www.brizo.com
ARTICULATING KITCHEN FAUCET
79924
LLAVE DE AGUA-GRIFO CON BRAZO
ARTICULADO PARA COCINAS
ROBINET DE CUISINE À BRAS
ARTICULÉ
79924
1
Optional Escutcheon RP71451s
Opción de Chapetón RP71451s
Plaque de finition en option RP71451s
06/17/2019
Rev. E
Publicidad
Manuales relacionados para Brizo ARTESSO 63225LF Serie
Resumen de contenidos para Brizo ARTESSO 63225LF Serie
- Página 1 Opción de Chapetón RP71451s Plaque de finition en option RP71451s You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Brizo faucet you will need: ® • To READ ALL the instructions completely before beginning.
- Página 2 1 1/4" Min. From Center Line To Sink Bowl. 1 1/4" Mínimo. De la línea de centro para hundir el tazón de fuente. 1 1/4" ; Minimal. De la ligne centrale pour descendre la cuvette. Mount Faucet to Deck SHUT OFF WATER SUPPLIES. Remove Install the mounting bracket (1) and nut (2) onto the Your faucet is designed for a hole diameter of mounting shank (3) using wrench (4).
- Página 3 Optional / Opcional / Facultatif Optional Escutcheon Installation From underneath, install the nuts (1) and Install bracket (1) and nut (2) onto mounting washers (2) onto the studs (3). Ensure the shank (3). Tighten nut (2) securely using For optional installations using the 10" escutcheon (1), escutcheon is straight then tighten nuts (1), but wrench (4).
- Página 4 Custom Fit Connections Standard Connections Slide nut (1) over plastic sleeve (ferrule) (3). Start nut by hand NOTICE NOTICE onto supply valve connection (2) to prevent cross-threading. Turn nut until it feels snug. Then tighten nut at least 2 more To avoid risk of property damage, Follow If you determine the PEX supply tubing for this faucet is too turns with a wrench.
- Página 5 Correct method Incorrect Installation Instalación Incorrecta Método Correcto Installation Incorrecte Bonne méthode Do not install sleeve NOTICE Ensure cut is straight. upside down. Failure to use plastic sleeve (ferrule) in the correct orientation will result in disconnection and possible water damage. No instale la manga Asegúrese que el corte 1.
- Página 6 Note: Clip fits behind shoulders on outlet and hose fittings. Nota: Ajustes del clip detrás de hombros en las guarniciones del enchufe y de manguera. Note : Ajustements d’agrafe derrière des épaules sur des embouts de sortie et de durites. Flush Supply Lines Place a bucket below the outlet fitting and move the Push hose end (1) onto faucet outlet (2).
- Página 7 Optional Opcional Facultatif Soap Dispenser Installation (Accessory Order Only - RP75675 Specify Finish) Recommended spacing between holes for faucet and soap dispenser is 4" (101.6 mm) minimum. Notice Separate head (1) from body assembly (2). Make sure gasket (3) is properly seated in the base of the body assembly. Insert Property damage and water leak possible.
- Página 8 Maintenance If faucet exhibits very low flow – TURN OFF WATER may be stiff due to O-ring, but should rotate by hand. NOTE: Exterior arm screws are decorative and will SUPPLIES. Unscrew adapter (1) & knurled knob (4) Remove bonnet nut (9) by rotating counterclockwise with NOT need to be tightened during the lifetime of the from spray head and clean debris from sprayer inlet a wrench.
- Página 9 Hose and Sprayer Removal Hose and Sprayer Installation TURN OFF WATER SUPPLIES. Place bucket below outlet fitting under sink. Slide hose (1) through top of faucet hub (2). Screw decorative nut (3) clockwise Remove clip (1) from outlet (2) and disconnect hose (3). A small amount of water into top of faucet hub.
- Página 10 CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. LIMPIEZA Y CUIDADO DE SU LLAVE Tenga cuidado al ir a limpiar este producto.
- Página 11 TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH are not covered by this warranty. Brizo Kitchen & Bath Company shall not be liable for any damage to the product OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE. BRIZO resulting from reasonable wear and tear, outdoor use, misuse (including use of the product for an unintended ap- KITCHEN &...
- Página 12 79924 Rev. E...