Descargar Imprimir esta página

Black and Decker BM903650RB Manual Del Operador página 19

Publicidad

Idiomas disponibles

Idiomas disponibles

To cycle through these displays, press the select button. The
(information type) on the digital display will light in sequence
to show which type of information is being displayed.
Hour meter: The hour meter keeps track of how many hours
the unit has been running during the current operation as
well as the total number of hours the unit has been used.
AC voltage: When selected, the AC voltage indicator will
display the generator's voltage output.
Frequency: When selected, the frequency indicator shows
the generator's output frequency.
MOVING THE GENERATOR
 Turn the engine switch OFF. Disconnect any equipment
that is plugged into the generator.
 Turn the fuel valve to the OFF position.
 Allow 30 minutes of "cool down" time before storing the
machine.
 Tilt the machine away from you until it balances on the
wheels, then roll the machine to the desired location.
OPERATION
HIGH ALTITUDE OPERATION
The fuel system on this engine may be influenced by opera-
tion at higher altitudes. Proper operation can be ensured by
installing an altitude kit when required. See the table below
to determine when an altitude kit is required. Operating this
engine without the proper altitude kit installed may increase
the engine's emissions and decrease fuel economy and per-
formance. Kits may be obtained by contacting an authorized
service center or calling 1-800-726-5760, and should be
installed by a qualified individual.
Altitude Range*
3000 – 6000 ft
6000 – 8000 ft**
* Elevation above sea level
** At elevations above 8000 ft., the engine may experience decreased
performance
Page 15 — English
Kit Part Number
0 – 3000 ft
Not Required
Altitude Kit #1
Altitude Kit #2

Publicidad

loading