Echo DCS-3500 Manual De Instrucciones página 9

Power tool use and care
 Do not force the power tool. Use the correct power tool
for your application.
 The correct power tool will do the job better and safer at the
rate for which it was designed.
 Do not use the power tool if the switch does not turn it
on and off.
 Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
 Disconnect the plug from the power source and/or the
battery pack from the power tool before making any ad-
justments, changing accessories, or storing power
tools.
 Such preventive safety measures reduce the risk of starting
the power tool accidentally.
 Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
 Power tools are dangerous in the hands of untrained users.
 Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use.
 Many accidents are caused by poorly maintained power
tools.
 Keep cutting tools sharp and clean.
 Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
 Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
 Use of the power tool for operations different from those in-
tended could result in a hazardous situation.
For safe use of your product
WARNING
Battery tool use and care
 Recharge only with the charger specified by the manu-
facturer.
 A charger that is suitable for one type of battery pack may
create a risk of fire when used with another battery pack.
 Use power tools only with specifically designated bat-
tery packs.
 Use of any other battery packs may create a risk of injury
and fire.
 When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another.
 Shorting the battery terminals together may cause burns or
a fire.
 Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help.
 Liquid ejected from the battery may cause irritation or burns.
Service
 Have your power tool serviced by a qualified repair per-
son using only identical replacement parts.
 This will ensure that the safety of the power tool is main-
tained.
7