Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
04 Time
05 Digital Graphic
Display
06 POWER
07 START/PAUSE
NOTE
Extremely tangled items finished by the washer may degrade the drying efficiency or
cause the door to open. We recommend that you untangle the items before drying.
Icon description
Filter Check
Child Lock
Sensor Dry
Simple steps to start
1. Press POWER to turn on the dryer.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings (Dryness and
Time) as necessary.
4. Optionally, you can activate options
available by pressing the relevant
button (Wrinkle Prevent).
36
English
DV3200T_DC68-03784N-03_EN.indd 36
Press to adjust the drying time for the Manual Dry cycles. This
is not available with the Sensor Dry cycles because the dryer
determines the drying time by sensing the current moisture level
of the load.
* Wrinkle Prevent
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry, and can be removed at any time during the
Wrinkle Prevent cycle.
Displays all cycle information, including the cycle time,
information code, and operating status.
Press to turn on/turn off the dryer.
Press to start or stop operation.
This icon displays after every load as a reminder to clean the
lint filter. Clean the lint filter before every cycle and make
sure the filter is properly inserted before starting a cycle.
This icon indicates that Child Lock is on. For more
information on Child Lock, see page 40.
This icon appears when the dryer operates the cycle which
senses the internal humidity to determine the drying time.
5. Press START/PAUSE. The dryer indicator
turns on with an estimated cycle time
on the display.
2020-12-07
10:51:28
Publicidad
