Publicidad
Idiomas disponibles
Idiomas disponibles
To change the cycle during operation
1. Press START/PAUSE to stop operation.
Cycle overview
Sensor Dry
Sensor Dry cycles sense moisture in the load and stop the dryer when the load reaches
the dryness level you have selected with Dryness.
Cycle
NORMAL
HEAVY DUTY
DELICATES
PERM PRESS
Manual Dry
You can change the drying settings manually to your preference.
Cycle
QUICK DRY
TIME DRY
AIR FLUFF
WRINKLE RELEASE
DV3200T_DC68-03784N-03_EN.indd 37
Description
For most fabrics including cottons and linens.
For drying items made out of heavy fabrics, such as jeans,
corduroys, or work clothes, with high temperature heat.
For heat-sensitive items at a low drying temperature.
Dry wrinkle-free cottons, synthetic fabrics, knits, and permanent
press fabrics automatically.
Description
A quick drying cycle running for 30 minutes. The default cycle
time is 30 minutes. However, you may manually change the cycle
time if necessary.
You can specify a cycle time in minutes.
Tumbles the load in room temperature air.
The WRINKLE RELEASE cycle will release wrinkles from items
that are clean, dry, and only slightly wrinkled, such as clothes
from a crowded closet, suitcase or items that have been in the
dryer too long after the cycle has ended. WRINKLE RELEASE can
be used with any temperature selection.
2. Select a different cycle.
3. Press START/PAUSE again to start the
new cycle.
English 37
2020-12-07
10:51:28
Publicidad
