Publicidad
Idiomas disponibles
Idiomas disponibles
UNPACKING
This product requires no assembly.
Carefully remove the product and any accessories from the
box. Make sure that all items listed in the packing list are
included.
Inspect the product carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.
INSTALLING/REPLACING THE GUIDE BAR AND CHAIN
DANGER: Never start the motor before installing the guide
bar, chain, chain cover and chain cover lock knob. Without
all these parts in place, the clutch can fly off or explode,
exposing the user to possible serious injury.
WARNING: To avoid serious personal injury, read and
understand all the safety instructions provided.
WARNING: Before performing any maintenance, remove
the battery pack from the saw. Failure to heed this warning
could result in serious personal injury.
CAUTION: Always wear gloves when handling the bar and
chain; these components are sharp and may contain burrs.
WARNING: Never touch or adjust the chain while the
motor is running. The saw chain is very sharp; always wear
protective gloves when performing maintenance to the
chain to avoid possible serious lacerations.
NOTE: When replacing the guide bar and chain, use only
identical replacement parts.
•
Remove the battery from saw.
•
Loosen the chain saw lock knob counterclockwise.
ASSEMBLY
WARNING: If any parts are damaged or missing, do not
operate this product until the parts are replaced. Failure to
heed this warning could result in serious personal injury.
If any parts are damaged or missing, please call
1-800-313-5111 for assistance.
PACKING LIST
Chain Saw with Blade Cover
Charger and Battery Pack
Instruction Manual
•
Remove the chain cover.
•
Remove the bar and chain from the mounting surface.
4
Publicidad
