Publicidad
Idiomas disponibles
Idiomas disponibles
3. Lay Table Top (#1) painted side down, on a smooth, flat surface. Use the shipping container
to protect the painted surface of table top.
4. Rotate U-support (#21) that is on bottom of Table Top until you see the screw holes in the slots of U-
clips (#22). If necessary Slide U-support (#21) side to side and back and forth to see holes.
See Figure 3 & Detail A.
Note: To aid in assembly you can use a cordless drill and Phillips bit. Wear safety glasses.
5. Insert Screw (#35) through slot in U-clip (#22) and into U-support (#21). See Figure 3 &
Detail A. Thread screw all the way into U-support until it touches the back of the tube. There
should be about 3/8" of screw (#35) left sticking out. Repeat for second Screw (#35) and U
Clip (#22).
6. Repeat steps 3-5 on other table top assembly.
Figure 3
1
21
4
Note: Slide U-Support back and forth
until you see the hole if necessary.
35
Detail A
21
22
If you want to see a video on how to insert Screw (#35) go to:
http://www.escaladesports.com/customer-service/videos.html
Or
Scan with your smartphone:
Publicidad
