Descargar Imprimir esta página

Casselin CCF5 Manual De Instrucciones página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
WARNING
In operation, the device can reach high temperatures. To avoid burns and accidents, do not use the
device in malfunction, and do not use spare parts that are not original.
ELECTRICAL HAZARD
Danger from electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The appliance must be unpacked
and checked completely before connection by a professional.
5.2 Use
WARNING
The set-up of the device installation and maintenance must be carried out by professionals only.
• Do not leave the appliance running without supervising it.
• During use, your hands should be dry.
• Do not move or tilt the device during operation.
MANUAL
START-UP
The device must be completely removed from its packaging. All protections must be completely removed.
Place the unit upright on a solid, flat surface. Never place the device on a flammable surface.
Do not install this appliance near open fires, or other heating appliances.
It is forbidden to place inflammable objects on the device or within 10 cm of the device.
Safety distances for flammable materials according to their degree of flammability:
Has non-flammable granite, sandstone, concrete, bricks, ceramic tiles, plaster.
B hardly flammable acumin, heraclitis, lihnos, itaver
C1 poorly flammable wood from feillus trees, plywood, hardened paper, umakart
C2 medium flammability agglomerated, solodur, cork, rubber, coatings
C3 easy flammability wood fiber boards, polystyrene, plyurethene, PVC
The electrical cable should be protected to at least 16 amps.
The device must be plugged directly into a wall outlet.
Using a multiple socket will cause the device to trip.
USE
Connect the appliance, press the ON / OFF switch: the resistance will then heat up.
To turn off the device, press the switch.
Always unplug the appliance when the appliance is not in use.
NOTE
The device is fitted with a safety system in the event of overheating. If tripped, unplug the device and allow it
to cool. If this protection system operates regularly, it is imperative to contact your dealer.
After automatic shutdown, the device can only be put into service by pressing the Reset button on the back
of the device, wait for the temperature to drop, press the Reset button.
EN

Publicidad

loading