Descargar Imprimir esta página

DeWalt DWMT70786L Manual De Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING:
• Avoid prolonged use: repetitive motion or exposure to vibration
may be harmful to your hands or arms. Use gloves to provide
extra cushion, take frequent rest periods, and limit daily
time of use.
• Do Not Use oxygen or reactive gases; explosion may occur.
• Do Not Exceed air pressure of 90 PSI.
• Read all manuals included with this product carefully.
Be thoroughly familiar with the controls and the proper use
of the equipment.
• Only persons well acquainted with these rules of safe operation
should be allowed to use the air tool.
• Do not exceed any pressure rating of any component
in the system.
• Disconnect the air tool from air supply before changing tools or
attachments and during non-operation.
• Always wear safety glasses and ear protection during operation.
Always wear approved safety glasses with shields. Always wear
approved hearing protection.
• Do not wear loose fitting clothing or apparel which contains
loose straps or ties, etc. Which could become entangled in
moving parts of the tool and results in serious personal injury.
• Do not wear jewelry, watches, identifications, bracelets,
necklace, etc. When operating any tool, they may become
caught in moving parts and result in serious injury.
• Do not depress trigger when connecting the air supply hose.
• Always use attachments designed for use with air
powered tools.
• Do not use damaged or worn attachments.
WARNING:
• Never trigger the tool when not applied to a work object
Attachments must be securely attached.
Loose attachments can cause serious injury.
• Protect air lines from damage or puncture.
• Never point an air tool at oneself or any other person.
Serious injury could occur.
• Check air hoses for weak or worn condition before each use.
Make sure all connections are secure.
• Keep all nuts, bolts and screws tight and ensure equipment is in
safe working condition.
• Do not put hands near or under moving parts.
• Do not drill into areas which may contact electrical wiring
or piping
• Hold drill firmly with both hands when using hole saws or other
bits that may bind when breaking through material.
4

Publicidad

loading