Descargar Imprimir esta página

LEGRAND SANUS LLT2 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

STEP 2A Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
Drywall covering the wall must not exceed 5/8 in. (16 mm)
Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
Minimum horizontal space between fasteners: 16 in. ( 406 mm)
Stud center must be verified
1
Max.
5/8 in.
(16 mm)
3
2 ¾ in. (70 mm)
7/32 in.
(5.5 mm)
IMPORTANT: Drill into the center of the stud.
6
Min.
16 in.
(406 mm)
06
Wood Stud Installation
2
06
NOTE: During operation, your TV
shifts 2.28 in. (58 mm) when retracted
or extended. The wall plate and TV
brackets have built-in adjustments to
help fine-tune your TV placement.
4
Install the wall plate
07
TIP: Use the slotted holes for fine-tuning your placement.
Tighten all lag bolts only until they are pulled firmly against the wall plate.
CAUTION:
Improper use could reduce the holding power of the
lag bolt. DO NOT over-tighten the lag bolts.
RETRACTED
EXTENDED
2.28 in. (58 mm)
09
08
using four lag bolts
and washers
08
Go to STEP 3 on PAGE 9.
07
.
09

Publicidad

loading