Stiga Force T8630 Manual Del Usuario página 5

Note: Wear safety glasses for Step 9.
Note: Rotate U-Support #7 until you see the screw
hole in the slot of U-clip #3. Slide U-support #7 side
to side and front to back if necessary.
9. Insert Screw #19 through slot in U-Clip #3 and the into U-
Support #7. Thread it all the way into U-Support #7 until it
touches the back of the tube. There should be about 3/8
inch of screw #19 left sticking out. Do not insert screw in
middle #3 U-Clip. See Figure 4 and Detail E. Repeat
for U-Leg (#2) and U clip (#18). See Detail F.
If you want to see a video on how to insert Screw (#19) go to:
http://www.escaladesports.com/customer-service/videos.html
Or
Scan with your smartphone:
Note: Rotate U-leg #2 until
you see the screw hole in
the slot of U-clip #18. Slide
U-leg #2 side to side and
front to back if necessary.
19
3
7
Note: Rotate U-Support #7
until you see the screw hole in
the slot of U-clip #3. Slide U-
support #7 side to side and
Detail E
front to back if necessary.
5
Detail F
2
Figure 4 Figure 3
Figure 3
7
19
18
2