General safety instructions
NOTICE!
A
Use ductwork or cable ducts if it is necessary to lay cables
through metal panels or other panels with sharp edges.
Do not lay the 230 V mains cable and the 12 V DC cable in the
same duct.
Do not lay the cable so that it is loose or heavily kinked.
Fasten the cables securely.
Do not pull on the cables.
2.4
Operating the device safely
DANGER! Danger of electrocution
D
Do not touch exposed cables with your bare hands. This applies
especially when operating the device from the AC mains.
To be able to disconnect the device quickly from the mains, the
socket must be close to the device and be easily accessible.
WARNING!
!
Only use the device in closed, well-ventilated rooms.
Do not operate the device in systems with lead acid batteries.
These batteries give off explosive hydrogen gas that can be
ignited by sparks on electrical connections.
CAUTION!
!
Do not operate the device
– In salty, wet or damp environments
– In the vicinity of corrosive fumes
– In the vicinity of combustible materials
– In areas where there is a danger of explosions.
Before starting the device, ensure that the power supply line
and the plug are dry.
Always disconnect the power supply when working on the
device.
Please observe that parts of the device may still conduct voltage
even if the fuse has blown.
Do not disconnect any cables when the device is still in use.
42
MCA1215 – MCA2440
EN