Publicidad
Idiomas disponibles
Idiomas disponibles
Symptoms
Filter clogged.
Supply hoses may be kinked.
Washing machine
not filling
properly
Insufficient water supply.
Hot and cold supply hoses
are reversed.
Kinked drain hose.
Washing machine
will not drain
Drain located higher than 1.2
water
m above the floor.
Incomplete or
no dispensing of
Too much detergent used.
detergent
The load is too small.
Cycle time is
Heavy articles are mixed with
longer than usual
lighter items.
The load is out of balance.
Performance
Symptoms
Proper options not selected.
Poor stain
removal
Previously set stains.
Reason
Make sure the inlet filters on the fill valves are
not clogged.
Check that supply hoses are not kinked or
clogged.
Make sure that both hot and cold water taps are
turned on all the way.
Check supply hose connections.
Ensure that the drain hose is not kinked.
Make sure that the drain hose is no higher than
1.2 m above the bottom of the washing machine.
Follow the guidelines provided by the detergent
manufacturer.
Add more items to allow the washing machine to
balance the loads.
Always try to wash articles of somewhat similar
weight to allow the washing machine to evenly
distribute the weight of the load for spinning.
Manually redistribute the load if articles have
become tangled.
Reason
Heavier soils and tougher stains may require
extra cleaning power. Select the Remojo (Soak)
feature to boost the cleaning power of the
selected cycle.
Articles that have previously been washed may
have stains that have been set. These stains
may be difficult to remove and may require hand
washing or pretreating to aid in stain removal.
Solution
Solution
f f
EN
35
Publicidad
