Bosch HEAVY DUTY GSR Professional 18V-150 Manual Original página 18

18 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The GSB
is also designed for impact drilling in brick, masonry and
stone.
®
With the Bluetooth Low Energy Module GCY 42 inserted,
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth
less technology.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Tool holder
(2) Keyless chuck
(3) Depth stop
(4) Auxiliary handle (insulated gripping surface)
(5) Wing bolt for depth stop adjustment
Technical Data
Cordless drill/driver
Article number
Rated voltage
A)
No-load speed
– First gear
– Second gear
A)
Impact rate
Torque, hard/soft screwdriving application based on ISO
A)
5393 (2017)
A)
Max. torque
Max. drilling diameter
– Wood
– Steel
– Masonry
Tool holder
Max. screw diameter
Weight according to EPTA-Procedure 01:2014
Recommended ambient temperature during charging
Permitted ambient temperature during operation and
during storage
1 609 92A 59B | (08.03.2021)
(6) Torque presetting ring
(7) Mode selector switch
(8) Gear selector switch
(9) LED for electronic angle detection (EAD)
(10) Belt clip
(11) Rechargeable battery
(12) Battery release button
(13) Worklight (user interface)
(14) User interface
(15) Universal bit holder
(16) Rotational direction switch
(17) On/off switch
(18) Handle (insulated gripping surface)
(19) Cover for GCY 42 Bluetooth® Low Energy Module
® (20) Button for electronic angle detection (EAD) (user in-
wire-
terface)
(21) LED for preset slope angle of electronic angle detec-
tion (EAD) (user interface)
(22) LED for power tool (user interface)
(23) LED for KickBack Control (user interface)
(24) Button for KickBack Control (user interface)
(25) Auxiliary handle order number 1 602 025 07Y
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
V=
-1
min
-1
min
-1
min
Nm
Nm
mm
mm
mm
mm
B)
kg
°C
°C
a)
GSR 18V-150 C GSB 18V-150 C
3 601 JJ5 0.. 3 601 JJ5 1..
18
0–550
0–2200
–
100/84
150
150
16
–
1.5–13
13
2.4–3.5
0 to +35
–20 to +50
Bosch Power Tools
18
0–550
0–2200
0–30000
100/84
150
150
16
20
1.5–13
13
2.5–3.6
0 to +35
–20 to +50