Descargar Imprimir esta página

AVS HC02 Instrucciones De Instalación página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation Steps
Clean entire headlight assembly.
1
Carefully push on front surface of headlight cover until
top and bottom tab slides securely around headlight
assembly.
headlight
cover
3
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Warranty
Unconditional Lifetime Warranty: Auto Ventshade Headlight Covers are warranted to be free of manufacturer's
defects. Neither seller or manufacturer shall be liable for any injury, loss or damage, direct or consequential,
arising out of use of this product. User assumes all risk liability whatsoever in connection with this product.
Auto Ventshade requires the retention of these instructions for as long as you own avs headlight covers. Auto
Ventshade also requires that you transfer instructions to any subsequent owner of the vehicle that uses these
covers. Failure to transfer these instructions may void all warranties associated with the headlight covers.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International,
Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment.
We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of
installation.
Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
headlight
assembly
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade
logo and the AVS
TM
TM
Align cover with headlight assembly.
2
Repeat Steps 1-3 for opposite side.
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2

Publicidad

loading