ASSEMBLY INSTRUCTIONS
3.)
Place propane tank in the metal ring inside the fire table body. Tighten down the screw
on the side of the tank seat to secure the propane tank.
4.) Connect the LP Gas Tank
Before connection, be sure there is no debris caught in the
collar of the gas cylinder, the regulator valve or the burner
and burner ports.
Connect the gas line to the tank by turning the connection
knob clockwise. Hand tighten only.
To disconnect the LP tank, make sure the valve on the LP
gas tank is completely closed.
Disconnect the connection knob by turning it counter-
clockwise until it is detached from the valve.
8