Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Operation
QUIET Operation
QUIET Operation
SELF
PURIFY
CLEAN
ECO SENSOR
QUIET
QUIET
You can use this function when silence is needed for rest or
reading.
For each press,
is displayed Air conditioner starts
QUIET function operation. In QUIET operation mode, fan
speed automatically takes low speed of AUTO fan mode.
Press QUIET button again,
stops.
3
3
QUIET Operation
disappears, the operation
COOL,HEAT and
COOL,HEAT and PURIFY
SELF
PURIFY
CLEAN
ECO SENSOR
Purifying Function:
IFD filter:
In the cooling/heating/fan mode, if you press down the
button of the remote controller, the dust removal filter will slide to
the working position within three minutes and start purifying.
In the smart operation mode, the product will determine whether
the purifying function needs to be turned on or not automatically
according to the PM2.5 concentration value actually detected by
the indoor air quality sensor. If yes, then the purifying function will
turn on automatically. When the PM2.5 concentration drops to a
certain value, the purifying function will turn
you do not need to press the remote
Exit method:
1. While the air conditioner is operating in the purifying mode, if
your press down the
PURIFY
will be cancelled and the dust removal filter will slide back its
original position.
Matters needing attention:
1. Users can set whether to turn on the automatic purifying mode
through the APP.
5. When the purifying function is turned on, due to the sliding of
the dust removal filter, slight noise may be generated and this is a
normal phenomenon.
6. If the air quality indicator light still shows red after the purifying
has been operated for a long time period, we recommend you to
replace and clean the dust removal filter.
7. In the purifying mode, low fan speed operation will affect the
purifying effects.
8. You cannot enter the purifying mode from the self-cleaning
mode directly.
9. The purifying module of this product has transmission
mechanism, so please do not switch on and off the purifying
function
frequently.
Operation
1
Unit start.
2
Select operation mode.
Press the COOL button on
the remote control.
Press the HEAT button on
the remote control.
PURIFY
Press the PURIFY button on
the remote control.
PURIFY
off automatically and
controller.
button, then the purifying function
Publicidad
