Ego Power+ OSA1000 Manual Del Operador página 5

SPECIFICATIONS
Olive shaker BPM
Forkhead stroke
Weight
Measured sound power level L
Sound pressure level at
operator's ear L
PA
Guaranteed sound power level L
(according to 2000/14/EC)
Front-assist Handle
Vibration a
h
Rear Handle
PACKING LIST
PART NAME
Olive shaker assembly
Carbon rod
Shock absorber
Bolt & Nut
Allen Key
Operator's Manual
DESCRIPTION
KNOW YOUR OLIVE SHAKER ATTACHMENT (Fig. A)
1. Carbon Rod
2. Shock Absorber
3. Comb
4. Upper Piston Guard
5. Tube
ASSEMBLY
WARNING:
If any parts are damaged or missing, do
not operate this product until the parts are replaced.
WARNING:
Do not attempt to modify this product or
create accessories not recommended for use with this olive
shaker. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possibly
serious personal injury.
1780/2120 bpm
350mm-600mm
2.1 kg
90.1 dB(A)
K=1.97 dB(A)
WA
70.1 dB(A)
K=3 dB(A)
92 dB(A)
WA
1.8 m/s
2
K=1.5 m/s
2
4.3 m/s2
K=1.5 m/s2
QUANTITY
1
10
2
10
1
1
OLIVE SHAKER ATTACHMENT — OSA1000
CONNECTING THE OLIVE SHAKER ATTACHMENT TO
THE POWER HEAD
This olive shaker attachment is designed for use with EGO
56V LITHIUM-ION Power Head PH1400E.
See "INSTALLING AN ATTACHMENT TO THE POWER
HEAD" section in the power head PH1400E operator's
manual.
INSTALLING CARBON ROD
1. Loosen the 5 fixing bolts on the comb with Allen key
respectively.
2. Pass the 5 carbon rods through the 5 corresponding
holes in the black shock absorber one by one. (Fig.
C). Insert the carbon rods into each of the fixed holes
corresponding to the comb and then press it to the
bottom. (Fig. D)
3. Tighten the 5 fixing bolts on the comb with Allen key
respectively.
4. The other five carbon rods are installed the same way.
WARNING:
Never attach or adjust any attachment
while the power head is running or with the battery
installed.
OPERATION
WARNING:
Do not allow familiarity with this product
to make you careless.
CAUTION:
Before each use, make sure you have
pressed 10 carbon rods down to the very end. Inspect the
entire product for damaged, missing, or loose parts such as
screws, carbon rods, etc. Tighten securely all screws and
do not operate this product until all missing or damaged
parts are replaced.
APPLICATIONS
Intended use: You may use this product for the purpose of
harvesting nuts and fruits. You may use EGO POWER HEAD
to drive the 10 carbon rods of Olive Shaker's working head
to swing back and forth at high frequency, knocking the
Olive fruit from the branches to the ground.
NOTICE:
The tool is to be used only for its prescribed
purpose. Any other use is deemed to be a case of misuse.
NOTICE:
Keep children and bystanders away while
operating a power tool.
EN
5