Publicidad
Idiomas disponibles
Idiomas disponibles
4.INTENDED USE
The machine is intended for driving in and loosening
fasteners as well as for drilling in wood, metal and
plastic.
5.OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Assembly and Operation
ACTION
BEFORE OPERATION
Removing the battery pack
Charging the battery pack
Installing the battery pack
ASSEMBLY
CHUCK ADJUSTMENT
WARNING: Always lock off the On/Off
12
Switch and disconnect tool from power
source when changing accessories. Always
ensure the bit is secure before starting the tool.
Damage to the Chuck or a loose bit may cause
personal injury.
- Removing the bits
- Inserting the bits
- Installing the belt hook
OPERATION
Forward/Reverse Rotation Control
WARNING: Never change the
direction of rotation when the
chuck is rotating, wait until it has
stopped!
20V Cordless Sub Compact Brushless Drill Driver
TWO-SPEED GEAR CONTROL
Select low speed (1) for applications
requiring higher power and torque,
such as driving screws and drilling
in metal.
Select high speed (2) for fast drilling
or screwdriving applications or for
drilling in wood or masonry.
WARNING: To prevent gear
damage, always allow the
chuck to come to a complete stop
before changing the direction of
rotation.
TORQUE ADJUSTMENT
Drilling, Screw driving
FIGURE
NOTE:Rotate the adjustment ring to
the proper torque setting for the type
of material and size of screw you
are using.
See Fig. A1
• 1 - 3 For driving small screws
• 4 - 7 For driving screws into soft
See Fig. A2
material
• 8 - 11 For driving screws into soft
See Fig. A3
and hard materials
• 12- 15 For driving screws into hard
wood
• 16- 18 For driving large screws
• Drill icon - For heavy drilling
Operating the On/Off Switch
WARNING: Do not operate
for long periods at low speed
because excess heat will be
produced internally.
See Fig. B1
See Fig. B2
See Fig. C1,
C2
See Fig. D1,
D2, D3
See Fig. E
See Fig.
F1, F2
See Fig. G
EN
Publicidad
