Publicidad
4
1
2
6
English
Secure the supply lines to the stops.
Install the drain.
Set the high temperature limit stop (if desired).
9 mm
16 mm
Set the high temperature
limit stop (optional)
Use a 4 mm Allen wrench to push the screw
cover into the handle. (Retrieve the screw
cover when the handle is removed.)
Loosen the handle screw 4 complete turns.
Remove the handle.
4 mm
Remove the flange.
Remove the handle screw from the stem of the
cartridge.
Remove the high temperature limit stop.
Use two wrenches to insure
that supply hoses do not
twist.
Publicidad
