Descargar Imprimir esta página

Hitachi NC 40G Instrucciones Y Manual De Seguridad página 3

Ocultar thumbs Ver también para NC 40G:

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT INFORMATION
Read and understand tool labels and all of the operating instructions, safety precautions
and warnings in this manual before operating or maintaining this nailer.
Failure to follow warnings could result in DEATH or SERIOUS INJURY.
Most accidents that result from the operation and maintenance of Nailers are caused by the failure to observe
basic safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous
situation before it occurs, and by observing appropriate safety procedures.
Basic safety precautions are outlined in the "SAFETY" section of this Manual and in the sections which contain
the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identified by DANGERS and
WARNINGS on the Nailer and in this Manual.
Never use this Nailer for applications other than those specified in this Manual.
DEFINITIONS OF SIGNAL WORDS
DANGER
indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury, or
may cause machine damage.
NOTE
emphasizes essential information.
EXPLANATION OF THE NAILING ACTION OF THE HITACHI NAILER
This tool has a FULL SEQUENTIAL ACTUATION MECHANISM.
First, press the push lever against the workpiece; next, pull the trigger to drive the nail. Follow the same sequence to
continue driving nails.
— 3 —
English

Publicidad

loading