Dialing Mode - Panacom PA-7580 Manual Del Usuario

Review Outgoing Call List
Press OUT button to view the last outgoing call made, press it again
to view previously
Make a call from the call's memory
Press UP or DOWN button to select the number. Then press button
or RD/BACK or pick up the handset to dial out the number
Predialing
While is on-hook enter the phone number to be called, then press
the RD/BACK button to dial out the number.
Press the DEL to delete the current wrong number.
Delete Numbers from List
Press UP or DOWN or OUT buttons to select the number to be de-
leted. Then press the DEL button to deleted the number. Press the
DEL and hold it for 3 seconds to delete all the list of incoming call or
outgoing call numbers.
Auto Redial
In speaker mode of the line is busy, press RD/BACK button to Au-
toredial the number. The phone will ring when the line is free.
The interval time is 6 seconds, press any button to stop the autoredi-
aling. The phone will keep on autoredialing until the call is connect-
ed. After the seventh ring, the phone will be cut off automatically.
Timer of Call
On conversation, the LCD displays "00-00". The timer will start when
the line is not busy.
The LCD will keep displaying the conversation time for 3 seconds
after the call ends.
HOLD Function
When you are in conversation you can press HOLD, the other side
will hear music playing. You can put down the handset back to the
base unit. The music will be off when you pick up the handset back
again or press to resume conversation.

DIALING MODE

Before the phone is put in service, you can turn the dialing mode
switch to Pulse (P) or Tone (T) position to be set in accordance with
the dialing method used by your local public telephone exchanger:
NOTE:
T(tone):dual-tone multi-frequency dialing(DTMF)
P(pulse):pulse dialing
Pg. 6