DeLOCK 64182 Manual Del Usuario página 3

English
Package content
• Hub USB 10 Gbps
• 1 x cable USB 10 Gbps Type-A male to USB 10 Gbps Type-A male,
length ca. 80 cm
• External power supply
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Installation
1.
Connect the enclosed USB cable to the USB Type-A port of the hub and a
free USB port of your system.
2. The hub will be recognized and you can start using the device immediately.
3. Connect the included power supply to the DC input port. This is needed for
the devices which are connected to the hub if the power from USB port of the
system is not enough.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 02/2023
-3-