Publicidad
Idiomas disponibles
Idiomas disponibles
CORDLESS IMPACT DRIVER 20V
PDSSAP 20-Li B3
Introduction
Congratulations on the purchase of your new tool.
You have chosen a high-quality product. The oper-
ating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass all associated documents on to any future
owner(s).
Intended use
This appliance is intended for screwing in and
unscrewing screws as well as for tightening and
loosening nuts. The appliance has clockwise/anti-
clockwise rotation, a 1/4" hexagon socket bit
holder and an LED working light. The light on this
appliance is intended to illuminate the immediate
work area of the appliance. The rotary impact
function of the appliance enables the power of the
motor to be converted into uniform rotary impacts.
The impact mechanism comes into effect during
tightening and loosening.
The appliance is designed for use by adults. Young
people under 16 years of age may only use the
appliance under supervision. The manufacturer
accepts no liability for damages caused by
improper use or incorrect operation of the appli-
ance.
Use this appliance only as described and for the
application areas specified. The appliance is not
intended for commercial use. Any other usage or
modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage attributable to misuse.
2
GB │ IE
■
│
Features
1 Tool holder
Locking collar
1a
2 Rotation direction switch/lock
3 Belt clip
Fixing screw
3a
4 LED work light
5 Torque display
6 Torque preselection
7 ON/OFF switch/speed control
8 Battery pack*
9 Release button for the battery pack
0 High-speed charger*
q Battery display LED
w Battery charge level button
e Red charge control LED
r Green charge control LED
t Ready2Connect LED
Package contents
1 cordless impact driver 20V
1 belt clip
1 carrying case
1 set of operating instructions
Technical specifications
Cordless Impact Driver 20V PDSSAP 20-Li B3
Rated voltage
Gears
Rated idle speed
Impact frequency
20 V
(DC)
4-speed gearbox
1st gear n
0–1900 rpm
0
2nd gear n
0–2400 rpm
0
3rd gear n
0–3050 rpm
0
4rd gear n
0–3600 rpm
0
1st gear 0–1200/min
2nd gear 0–2400/min
3rd gear 0–3800/min
4rd gear 0–4300/min
PDSSAP 20-Li B3
Publicidad
