Jimmy JV85 Manual De Instrucciones página 7

Use of Vacuum
Attention: When use the product for first time,
battery power is not full. Need to charge the
vacuum before using.
Charging holder assembly
Assembly method one: Put the vacuum cleaner in
the holder, and lean the vacuum cleaner against the
wall, place the holder in the position that vacuum
cleaner floorhead does not touch ground. Take off
the handheld vacuum cleaner, follow Fig to place
expansion pipe on the wall and follow Fig to place
the holder to the expansion pipe position, and lock
in the screw. After assembly completed, put the
vacuum to charger holder to charge or store.
Attention: Do not fix the holder to bathroom or other humid
wall.
Charging of vacuum cleaner
When the vacuum cleaner power is insufficient,
charge the vacuum cleaner in time ; When the
voltage is too low,to protect the battery, vacuum
cleaner will be automatic power-off,at this time
the vacuum cleaner need to be charged.When charging, plug the charger connector into the A/
C power socket,hang the handheld vacuum cleaner on the holder to start charging.When the
handheld vacuum cleaner LED display shows an increase in power, it indicates that the vacuum
cleaner is charging. When charging is completed, LED display show 100% power.
After charging, please pull the charger plug off power socket and stop charging.
Attention: if power cord is damaged, to avoid danger, it must be replaced by a professional people of the
manufacturer, repair ing agent or similar department.
4
Expansion pipe
6
5
Charging holder
Charging holder
7
5