Tennant MV142044 Manual Del Operador página 6

Tennant V14
DRY CLEANING
OPERATING INSTRUCTION
- Insert the cloth filter in the tank (Fig. 1).
- Assembly the head on tank and block it by hooks (Fig. 3)
- Connect the flexible hose into the inlet
(Fig. 4).
- Connect the extensions to other side of flexible hose (Fig.
5).
- Select the most suitable accessory (Fig. 6).
- Connect the plug to power socket then switch on the
equipment (Fig. 7).
- Example of use of flat lance (Fig. 8).
- Example of use of round brush (Fig. 9).
- Example of use of brush for floor cleaning
(Fig. 10).
- If a paper bag is provided, insert it in the tank on the
deflector (Fig. 12).
6
GB
LIQUID SUCTION
OPERATING INSTRUCTION
- Remove the cloth filter bag (Fig. 2).
- Assembly the head on tank and block it by hooks(Fig. 3)
- Connect the flexible hose to the inlet (Fig. 4).
- Connect the extensions to other side of flexible hose (Fig.
5)
- Connect the wet tool (Fig. 6).
- Connect the plug to power socket then switch on the
equipment (Fig.7)
- Example of use of wet tool (Fig. 11).