Onkyo NCP-302 Manual Avanzado página 23

When Wi-Fi settings with AUX
∫
connection aren't going well
If the volume of the device where the app is
installed is low or if sound effects are set to on, it
may not be possible to set properly. Try
increasing the volume or turn the sound effects
off.
When you cannot connect to a network
∫
via Wi-Fi
0 If this unit is connected by both an ethernet
cable and Wi-Fi to the access point, the
ethernet connection is prioritized. The
connection switches to Wi-Fi when you
disconnect the ethernet cable.
0 If the device being used (wireless LAN router,
etc.) is too far from the unit, or if there is an
obstacle between them, improve the Wi-Fi
performance by closing the distance between
them, for example.
0 Avoid using devices that generate
electromagnetic waves, such as a
microwave.
EN
23