Orbegozo RO 1210 C Manual De Instrucciones página 13

RO 1210 C
SETUP
Installation of wheels:
Do not operate the heater without the wheels fixed correctly. Insert part 1 into the wheels 2 and 3. Fit
part 4 into part 1. Wheel set is finished. Then fit them onto the body of oil filled radiator.
Operating Instructions
Place the heater on the floor at least 90 cm away from the wall and any other objects such as
furniture, curtains or plants.
With the power switch in the OFF position, plug in the heater. Switch in the ON position for heating.
USING THE THERMOSTAT
The thermostat will automatically maintain your desired room temperature.
- Turn the thermostat control clockwise all the way round until you hear a "click", this sounds
indicates that the heater is activated, the pilot lights is ON. Continue turning the thermostat
clockwise to its highest setting.
- When the pilot light is ON, the heater is activated.
13