Orbegozo RA 2000 E Manual De Instrucciones página 13

RA 2000 E RA 2500 E
USING THE THERMOSTAT AND POWER SWITCHES
1. Room temperature can be adjusted using the thermostat. Simply turn the thermostat knob clockwise, to
increase the heat, and anti-clockwise to decrease the temperature, until you reach the desired temperature.
2. Switch the heater to one of the following power settings:
a. Push switch one 800W/1000W (for RA 2000 E and RA 2500 E respectively).
b. Push switch two 1200W/1500W (for RA 2000 E and RA 2500 E respectively).
c. Push switches one and two for total heating 2000W/2500W (for RA 2000 E and RA 2500 E respectively).
Note: This radiator heater is filled, and will cool down slowly after the power is shut off. Allow the radiator
heater to cool prior to any movement, the built carry handle should be used for easy movement.
13