Publicidad
Idiomas disponibles
Idiomas disponibles
8. LCD Display
8.2 Function Summary and Button Definition
· Function Summary
The LCD display has many functions to meet riders' needs. The indication elements
are as follows:
· Intelligent battery SOC indicator
· Assist level selection and indicator
· The lighting ON/OFF
· Push-assistance function and indicator
· Error code indicator
· Button Definition
There are 3 buttons on the display (
). In this manual, we use ON/OFF, UP,
DOWN to represent these 3 symbols.
· Installation
Th LCD display can be mounted on the left side of handlebar close to its grip. Adjust the
angle for a good screen view. Cut off the power before connecting the corresponding
connectors between display and controller.
8.3 General Operation
· Switching the E-bike ON/OFF
To switch on the E-bike system and provide the power supply to the controller, hold
the ON/OFF button for 1s. To switch off E-bike system, hold the ON/OFF button for
1s. The E-bike system no longer uses the battery power.
When E-bike system is switched off, the leakage current is less than 1μA.
When the E-bike is parked for over 15 minutes, the E-bike system switches off
automatically.
· Switching the Lighting ON/OFF
When display is on, long press the UP button for more than 1S to turn on the headlights.
The light icon on the display sticker goes on and the battery LEDs and assist level
LEDs darken at the same time.
· Switching Push-assist Mode ON/OFF
To activate the push-assistance function, short press ON/OFF button and press down
DOWN button within 3S and hold DOWN button for continus time of more than 1S.
E-bike is activated to go at a uniform speed of less than 6 Km/h. Five assist level LEDs
are circularly lighting in turn. The push-assist function is off as soon as you release
the DOWN button. The power-assisted push function can only be used when the user
pushes the E-bike, please do not use it in the riding state.
20
YOU-RIDE VIENA
Publicidad
