BLUE SKY WBFB36SG -MD Manual Del Usuario página 8

ASSEMBLY
NOTE: USE TWO PEOPLE TO LIFT AND TURN THE FIRE BARREL.
NOTE: WE STRONGLY ADVISE ONLY FINGER TIGHTENING BOLTS
DURING INITIAL ASSEMBLY. ONCE ALL BOLTS ARE INSERTED, FULLY
TIGHTEN ALL BOLTS. DO NOT OVERTIGHTEN.
STEP 1
Insert the ash catch connector [L]
D
through the ash catch [G] and into the
bottom of the fire bowl [D]. Secure the
ash catch connector with two nuts [P],
Q
one on either end of the connector.
L
STEP 2
G
P
Turn the fire bowl upside down
and place on soft surface to protect
the finish. You may require two people
F
M
to lift the fire bowl.
Slip one leg [F] into a bracket on the
bottom of the fire bowl [D] and secure
with two M6 x 10 mm bolts [M].
Repeat to attach the other two legs.
D
Securely tighten all bolts, then turn the
fire bowl upright.
STEP 3
Start building the top ring on the
opposite side of the fire bowl from
were the swing grill will be mounted.
Look for the holes closer to the middle
of the fire bowl – this is where the
swing grill will be secured.
8 | www.bluesk youtdoorliving.com