BLUE SKY WBFB36SG -MD Manual Del Usuario página 9

Make sure not to fully tighten bolts
C
until all four sections of the top ring
are assembled.
O
Attach one top ring section [C] to
P
E
the fire bowl [D] by inserting one
N
M6 x 15 mm bolt [N] into the top
D
ring's support arm from the outside,
then through one of the holes in the
top edge of the fire bowl. On the
inside of the fire bowl, insert one
bracket [E] and secure in place with
one washer [O] and nut [P].
Insert a second top ring section into
the end of the first top ring section and
attach to the fire bowl as described
above.
STEP 4
Before connecting the last two top
ring sections, attach the swing grill
stand [K] to the fire bowl [D]. Insert
C
two M6 x 15 mm bolts [O] into the
stand from the outside and through
the two holes located vertically on
D
the fire bowl. Secure each bolt on
Q
P
O
the inside of the fire bowl with one
washer [P] and nut [Q].
K
Attach the remaining two top ring
sections [C] as described in step 3.
Make sure all of the top ring sections
are joined together and that all the
brackets [E] are at a right angle with
the tab positioned close to the top
edge of the fire bowl and facing
towards the center of the fire bowl.
Securely tighten all bolts.
9