GE AGW08 Manual Del Propietario E Instrucciones De Instalación página 4

About the controls on the air conditioner.
Features and appearance may vary.
Controls
ON/OFF Pad
Turns air conditioner on and off.
Increase
Use to set temperature when in COOL mode.
MODE
Use to set the air conditioner to COOL or
FAN mode.
FAN Pad
Use to set the fan speed to LOW (F1),
MED (F2) or HIGH (F3).
Remote Control
s
To ensure proper operation, aim the remote
control at the signal receiver on the air
conditioner.
s
The remote control signal has a range of
up to 21 feet.
4
P o w e r
Air Conditioner Controls
v w
/Decrease Pads
Remote Control
TIMER Pad
ON—When the air conditioner is off,
it can be set to automatically come on in
1 to 12 hours at its previous setting. Each
touch will set the timer in hours.
OFF—When the air conditioner is on,
it can be set to automatically turn off in
1 to 12 hours. Each touch will set the timer
in hours.
To cancel the timer, press the TIMER pad
until the display time disappears.
Remote Control Signal Receiver
Display
Shows the set temperature or time remaining
on timer.
s
Make sure nothing is between the air conditioner
and the remote control that could block the
signal.
s
Make sure batteries are fresh and installed
correctly as indicated on the remote control.