hillvert HT-IRI-04 Manual De Instrucciones página 23

+/- button (to increase/decrease the parameter value)
•
Pressing the appropriate button increases or decreases the value for a given
parameter. Holding the button pressed down causes a faster parameter value
change.
Time delay activation button before starting.
•
When the dial is in the "RUN" position, pressing the time delay activation button
will postpone the start of the automatic operation schedule of the device by 0-24-
48-72 hours (depending on the number of times button is pressed).
Activation/deactivation of manual watering control
•
With the function knob in the RUN position, press the manual control button to
turn on continuous watering for 2-240 minutes, regardless of the programmed
operating mode.
3.3.2 Programming automatic control
Clock setting
•
Set the timer function selector to the SET CLOCK position, and use the value
increase/decrease buttons to set the correct time.
Setting the start time
•
Set the timer function selection knob to the START TIME, and use the value
increase/decrease buttons to set the correct time.