Publicidad
Idiomas disponibles
Idiomas disponibles
13. Navigating the Patient Menu
13.1 Steps to Navigating the Patient Menu
13.1.1 Accessing the Main Interface
Connect the power cord and power adapter properly. The screen displays the Main Interface
shown in Fig. 13-1 (only applies to E-20A-H-O), or the Main Interface shown in Fig. 13-2 (only
applies to E-20AJ-H-O).
13.1.2 Bringing up the Initial Setup Interface
From the Main Interface shown in Fig. 13-1 or Fig. 13-2, press and hold the Ramp Button
for three seconds. The screen displays the Initial Setup Interface of the Patient Menu, as
shown in Fig. 13-3.
The first icon
on the left side of the screen indicates the Main Interface, the second icon
indicates the Initial Setup Interface, and
turn the Knob
, the cursor switches among the three icons, and the interface displayed on
the screen changes accordingly.
13.1.3 Accessing the Setup Interface
When the cursor is on the icon
Interface by pressing the Knob
E-20A-H-O / E-20AJ-H-O User Manual V2.3
Fig. 13-1
Fig. 13-2
Fig. 13-3
the third icon
, the screen displays the Setup Interface. Access the Setup
. The first option on the Setup Interface is then displayed in
19 / 36
indicates the iCode
Interface. As you
Publicidad
