Descargar Imprimir esta página

Bosch 0600861900 Manual Original página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
14 | English
Troubleshooting
Problem
Possible Cause
Power tool fails to
Battery discharged
operate
Power tool defective
Internal wiring of power tool damaged
Power tool func-
On/Off switch defective
tions intermittently
Excessive vibra-
Power tool defective
tions/noise
Sawing time per
Blade holder area needs cleaning
battery charge too
low
Saw blade has worn
Poor sawing technique
Battery not fully charged
The saw blade is
Battery is getting discharged
running slow
On/Off switch is not fully pressed
Overloaded during operation
Green and red LED
Battery temperature is out of charging range Increase or reduce the battery temperature
flash alternately
Red LED flashes 1x Battery voltage is too low, battery is empty
Red LED flashes 2x Battery temperature is out of operating
range
Red LED flashes
Overload (jammed blade)
fast 5x
Maintenance and Service
Maintenance, Cleaning and Storage
Before any work on the machine (e. g. mainte-
nance, changing the tool, etc.) as well as during its
transport and storage, lock the On/Off switch in
the off position. There is danger of injury when the
On/Off switch is unintentionally actuated.
Always remove the blade before any work on the
machine.
For safe and proper working, always keep the ma-
chine and ventilation slots clean.
Clean the saw blade holder preferably with com-
pressed air or a soft brush. Remove the saw blade
from the power tool for this. Ensure proper operation
of the saw blade holder by applying a suitable lubri-
cant.
Heavy contamination of the machine can lead to mal-
functions. Therefore, do not saw materials that pro-
duce a lot of dust from below or overhead.
Store the power tool in a secure, dry place, out of the
reach of children.
Do not place other objects on the power tool.
After-sales Service and Customer Assist-
ance
www.bosch-garden.com
In all correspondence and spare parts order, please al-
ways include the 10-digit article number given on the
type plate of the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
F 016 L70 773 | (22.6.11)
Corrective Action
Recharge battery; also see "Battery Charg-
ing"
Contact Service Agent
Contact Service Agent
Contact Service Agent
Contact Service Agent
Hold the tool to point to the ground and start
to operate
Change saw blade
see "Working Advice" (figure 8)
Recharge battery; also see "Battery Charg-
ing"
Recharge battery; also see "Battery Charg-
ing"
Fully press On/Off switch
Reduce pressing force of tool against branch
to within the specified range between 0 °C
and 45 °C
Recharge battery; also see "Battery Charg-
ing"
Increase or reduce the battery temperature
to within the specified range between
–15 °C and +65 °C
Reduce pressing force of tool against branch
Operate tool before the blade touches the
branch
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
E-Mail: rbsa-hq.pts@za.bosch.com
Bosch Power Tools

Publicidad

loading

Este manual también es adecuado para:

Keo3 600 h61 90.600.861.900