Descargar Imprimir esta página

Blomberg BRFB1045 Serie Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

Adjusting the legs
If your refrigerator is unbalanced;You can balance your
refrigerator by turning its front legs as illustrated in the
you turn in the direction of black arrow and raised when
you turn in the opposite direction.Taking help from someone
to slightly lift the refrigerator will facilitate this process.
Compliance with RoHS Directive :
• The product you have purchased complies with EU RoHS
Directive(2011/65/EU). It does not contain harmful and
Package information
• Packing materials of The product are manufactured from
recyclable materials in accordance with our National
Environment Regulations.Do not dispose of the packaging
materials together with the domestic or other wastes.
Take them to the packaging material collection points
designated by the local authorities.
Connecting the water line to the water supply
• Connect the water line to a water supply valve.
If a valve is not present or you are not sure, consult
a quali ed plumber.
Connecting the water hose to the refrigerator
1. Slip the union (B) on to the water hose (A)
2. Push the water hose downwards rmly to slip it onto the
water inlet valve (C).
3.Tighten the union (C) by hand to ecure it onto the water
inlet valve.Normally, you are not required to tighten the
union with a tool.However, you can use a wrench or pliers
to tighten the union if there is a leakage.
WARNING:
water supply only.
WARNING:
Water Only.
Connect to potable
Fill With Potable
DANGER:
refrigerant used. do not use mechanical devices to
defrost refrigerator. Do not puncture refrigerant
tubing.
CAUTION :
Flammable refrigerant used. Consult repair
manual/owner's guide before attempting to
service this product. All safety precautions
must be followed.
CAUTION :
Dispose of properly in accordance with federal
or local regulations. Flammable refrigerant
used.
CAUTION :
puncture of refrigerant tubing; Follow
handling instructions carefully. Flammable
refrigerant used.
Changing the illumination lamp
To change the Bulb/LED used for illumination of your
refrigerator, call your Authorized Service. The lamp(s) used in
this appliance is not suitable for house hold room illumination.
The intended purpose ofthis lamp is to assist the user to place
food stu s in the refrigerator food stu s in the
refrigerator/freezer in a safe and comfortable way.The lamps
used in this appliance have to withstand extreme physical
conditions such as temperatures below -20 °C. (only chest and
upright freezer)
Electrical connection
W ARNING:
conection via extension cable or
multi-plus.
W ARNING:
cable must be replaced by the
Authorized Service Agent.
If two coolers are to be installed
side by side there should be at
1.5 inches distance between
them.
• Our company shall not be liable for any damages that will
arise when the pro duct is used eith out grounding and
electrical connection in accorddance with the national
regulations.
• Power cable plug must be with in easy reach after installation.
• Do not extension cords or cordless multi outlet between
your product and the wall outlet.
Hot Surface Warning !
Side wall of your product is equipped
with refrigerant pipes to improve the
cooling system. Refrigerant with high
areas, resualting in hot surfaces on the
side wall this is normal and does not
need any servicing.Plase pay attention
while touching these area.
6
EN
Risk of re or explosion Flammable
Risk of re or explosion.
Risk of re or explosion.
Risk of re or explosion due to
Do not make
Damaged power

Publicidad

loading

Este manual también es adecuado para:

Brfb1532 serieBrfb1542 serieBrfb1532ss