Wayscral ANYWAY E-100 Manual De Instrucciones página 48

To fasten the chain closed, we recommend using a quick clamp. This stands in for a female link, inserted
between to male links. The quick clamp also allows you to remove the chain more easily for cleaning.
To check that the chain length is correct, it must be put on the smallest sprocket. In this position, the
virtual line drawn between the wheel hub of the rear wheel and the axis of the lower derailleur pulley
should be vertical.
VII. Changing the pedals
To change the pedals, identify the pedals by the letter printed on the pedal. The right pedal has an "R"
printed on it and the left pedal has an "L" printed on it. Turn the R pedal clockwise to fix it on the crank
arm. Turn the L pedal anti-clockwise.
VIII. Wheel and engine
After the first month of use, it is advisable to tighten your spokes to limit the impact of the engine
traction on your rear wheel. You may hear a light noise when starting the engine. This noise is normal
because the engine starts and assists pedalling. This noise can become louder when in full use.
IX. Suspension
The fork can have 2 positions: the rigid position (to lock) and the flexible position (to unlock).
1.
Turn the right blue dial clockwise to lock the suspension and counter-clockwise to unlock. It is best to
lock the suspension on flat and unlock on paths.
Unlock
X. Kickstand
Before using the bicycle, make sure that the kickstand is definitely folded up.
Locking the suspension on the fork
48
Lock